| 10DN Parts | |
|
|
1963-1972 This was the first Alternator to be used by GM. Replacing old DC generators, Alternators generate an alternating current, which is then turned into a direct current by a series of diodes called a bridge rectifier. The first vehicle to use the 10DN was the Corvette in 1963. Externally regulated, the regulator was attached to the firewall or a front fender. There were two styles of the 10DN, an early and a late. We only provide parts for the late style 10DN. |
| Regulators | |
| for Delco style 10DN/20DN | |
| Solid State Voltage Regulator for Delco style 10DN/20DN Alternators | |
| Diodes | |
| $7.95 - 32-112 ........................................................... 35 Amp/100 Volt, 1/2 Positive Press-Fit Diode w/ Flag Terminal for Delco style 10DN alternators | |
| $4.95 - 32-110 ........................................................... 30 Amp/100 Volt, 1/2 Positive Press-Fit Diode w/ Flag Terminal for Delco style 10DN alternators | |
| $8.95 - 32-111 .......................................................... 35 Amp/100 Volt, 1/2 Negative Press-Fit Diode w/ Flag Terminal for Delco style 10DN alternators | |
| $5.95 - 32-109 .......................................................... 30 Amp/100 Volt, 1/2 Negative Press-Fit Diode w/ Flag Terminal for Delco style 10DN alternators | |
| Connector | |
| Condenser | |
| Brush Holder Assembly | |
| Pulleys | |