Quick Start Rebuild kits, Iceberg Alternator, CS-130 upgrade and repair kit
Add NEW LIFE and a Great CUSTOM LOOK to your Alternator with Quick Start's, Easy to Install "Iceberg Alternator" upgrade/Repair kits for Delco-Remy CS-130 type Alternator used on GM vehicles from 1987-1996*. Premium Kits for both Standard and 140 Amp Upgrade. Add Power, Reliability and Looks to your Alternator
*1993-1996 GM used both the CS-130 and CS-130-D alternators. The kits below fit the CS-130 alternator only. The easiest way to tell which alternator you have is the fact that the CS-130 alternator stator is 130 mm in diameter and uses 3 thru bolts to hold the front and rear housings together. The CS-130-D and all optional units use 4 thru bolts. Note: the CS-121 (has 3 thru bolts) which looks like the CS-130 but its stator is 121 mm in diameter. Easy Ordering.... For your convenience we offer several ways to place an order
Customer Credit Cards and Checks Will Be Billed National Quick Start Sales. If you do not receive an order confirmation within 24 hours of ordering, contact us by email info@qsalts.com or phone 616-606-5045 9:00AM-6:00PM Eastern Standard Time
High Output Conversion Kit
Delco-Remy CS-130 type "Iceberg Alternator" 140 Amp Upgrade with Patented Finned Housing Kit Features:
- Top Quality Components
- 140 amp Stator For MORE POWER!
- Patented Finned "Iceberg" Housing for better cooling and Greater Reliability
- Simple Instructions
- Kit Contents at Bottom of Page
-
High Output 140 Amp Iceberg Upgrade Kit, Note: the CS130 series alternator comes with either the smaller 6203 front bearing or 6303 larger front bearing, be sure to check. The kits with "B" have the larger bearing. Questions 1-616-785-7990
Standard Output Conversion Kit
Delco-Remy CS-130 type "Iceberg Alternator" Upgrade/Repair Kit with Patented Finned Housing Kit Features:
- Top Quality Components
- Patented Finned "Iceberg" Housing for better cooling and Greater Reliability
- Simple Instructions
- Kit Contents at Bottom of Page
-
Standard Output Delco-Remy CS-130 type Iceberg Upgrade Kit
Kit Contents
-
- Exclusive "Iceberg" Patented Finned Housing for Better Cooling
- Heavy Duty Rectifier with 50 Amp Press Fit Diodes. (OEM rectifiers use only 35 amp diodes)
- Copper Heat Transfer Grease for Better Rectifier Performance and Life.
- 10mm Wide Rear Bearing. (original uses only an 8mm bearing)
- Brush holder Assembly
- Bearing Tolerance Ring
- Drive End Bearing with Retainer
- Positive Battery Post Insulator
- 3 Stator Lead Extensions
- Stator Lead Cover
- Step-by-Step Instructions
-
- All components as in standard kit except the following.
- Minus-the 3 Stator lead extensions
- Plus-High out-put 140 Amp Stator (original CS-130 alternators come with 85-105 amp stator)
-
The Self Exciting (one-wire) kits contain: